1 coat application
The intent of this specification is to provide a guideline for the preservation and improvement of a previously prepared sound, bituminous concrete pavement. This surface treatment shall consist of one (1) coat of Action Pave rubberized coal-tar pitch or LP base emulsion. The coat is to be fortified with mineral aggregate to form a sand slurry coat. This coating will protect the pavement from the deleterious effects of fuel spillage, salts, weather and oxidation.
The work covered by this specification consists of furnishing all labor, equipment and materials, and performance of all operations in connection with the application of rubberized coal-tar pitch or LP base emulsion slurry sealcoat on bituminous pavements, complete, in strict accordance with these specifications and the applicable drawings and subject to the contract terms.
After all repairs and a one coat application of sealer have been completed, we apply the markings for traffic control and parking. We can re-stripe following your existing layout, or re-engineer your parking area to provide additional spaces. For maximum durability, we use State and Federally approved line marking paint.