ACTION PAVE ACRYLIC FlNlSH COAT

DESCRIPTION -
100% acrylic emulsion, special pigmented prime color reinforcing pigments that provide a super durable, long lasting finish coat to all surfaces. ACTION PAVE ACRYLIC FlNlSH coat has been specifically engineered to protect the entire ACTION PAVE ATHLETIC SURFACE SYSTEM from the ultraviolet rays of the sun and to cool the surface for more pleasurable play. Unlike other acrylic surfacing finish coats, ACTION PAVE ACRYLIC FlNlSH is fully pigmented, resulting in longer lasting, richer, full depth color.

USE -
Apply over existing color coated surfaces where no additional texture is needed. Apply over ACTION PAVE ACRYLIC FILLER coat(s) to finish off the ACTION PAVE ATHLETIC SURFACING SYSTEM.

APPLICATION -
Use a standard, commercial quality, squeegee or hair type application brush 24", 30" or 36" in width. Clean squeegee with water immediately after use.

MIX DESIGN -
ACTION PAVE ACRYLIC FlNlSH is concentrated and needs to be mixed on site with clean water. Thorough mixing is required. Mortar mixer offers best results.
2 parts ACTION PAVE ACRYLIC FlNlSH
1 part water
 

COVERAGE -
To surface the standard tennis court (800 square yards) a one (1) coat application will require 55 gallons of concentrated ACTION PAVE ACRYLIC FINISH. A two (2) coat application will require 95 gallons of concentrated ACTION PAVE ACRYLIC FINISH. Approximate coverage ratio for a one (1) coat application = 15 square yards per gallon of concentrate.

SURFACE PREPARATION AND APPLICATION -
The surface must be clean and free of grease, oil and any other foreign debris. ACTION PAVE ACRYLIC FlNlSH coat is to be applied over previously color coated or new surfaces which have already received ACTION PAVE ACRYLIC FILLER coat(s). Spread ACTION PAVE ACRYLIC FlNlSH coat evenly by walking in one direction and then reversing direction. Always maintain a wet edge and do not overwork the material. Avoid leaving any puddles when squeegeeing material back and forth. Allow materials to dry sufficiently before applying the ACTION PAVE ACRYLIC WHITE LINE PAINT.

LIMITATIONS -
 

• Do not apply ACTION PAVE ACRYLIC FlNlSH coat when surface temperature is below 50 Degrees Farenheit (10 Celcius) or when fog, rain or high humidity is imminent.
• Do not apply if surface temperature is above 130 Degrees Farenheit (55 Celcius).
• Do not store in direct sunlight.
• Close cover tightly
• Keep from freezing.